This high effective cleaning lotion is for the maintaining and clearing of printer heads using dye ink. The successful rate is 70%-80%. It is environmental friendly.
For printer head on the cartridges:
1. Place the printer head upside, pour one drop on it and stay for a while. After the liquid infilters into it, clean it with cotton paper. Then install it into the printer is OK.
2. Pour several drops of cleaning lotion on the glass, soak the printer head for a while. Then clean it with cotton paper, install it into the printer is OK.
For piezo printer head:
1. Pour several drops on the ink absorbrant pad, then relocate the printer head, letting the cleaning lotion infilter into it.
2. Inhale some cleaning lotion with a syringe, replace the pin head with a tissue tube. Then plug the plastic pole into it, inject the liquid into the printer head, stay still for twelve hours.
3. Remove the printer head, Inhale some cleaning lotion with a syringe, replace the pin head with a tissue tube. Then plug the plastic pole into it, with nozzles upsided, inject and extract for several times.
4. Remove the printer head, pour some cleaning lotion into a clean container,
soak the printer head.
Notice: The liquid level should be less than 3 millimeter.